PRESS DESIGN
drive system: eccentric / crank
frame design: H-frame, monoblock
openings in uprights: yes
number of suspensions: 2
number of slide actions: 1
slide ejectors / cushion: no
table cushion: no
opening in table: yes
quick die change system: yes
feedstock transport direction: left to right
PRESS FORCES
total force (nominal): 630 to
PRESS TABLE
table surface (left-right): 3000 mm
table surface (front-back): 1600 mm
thickness of bolster plate: 200 mm
opening in bed (left-right): 2070 mm
opening in bed (front-back): 630 mm
number of T-slots: 10
SLIDE
slide force: 630 to
table surface (left-right): 3140 mm
table surface (front-back): 1600 mm
stroke: 400 mm
stroke rate (max.): 80 /min
autom. tool clamping device: yes
SLIDE (MECHAN. PRESS)
slide adjustment: 200 mm
stroke adjustment: yes
stroke min.: 71 mm
stroke max.: 400 mm
variable speed: yes
stroke rate (min.): 15 /min
stroke rate (max.): 80 /min
hydraulic overload protection: yes
main drive power: 98 kW
TOOL ASSEMBLY DIMENSIONS
shut height (stroke down, adjustment up), BDC: 700 mm
shut height (stroke down, adjustment up), BDC: 500 mm
passline opening (free passage in side columns): 1400 mm
free passage between side columns (height): 650 mm
distance between columns (H-frame): 3180 mm
OVERALL SPECIFICATIONS (COIL LINES)
sheet width max: 1300 mm
sheet thickness max: 4 mm
max. weight of coil: 15 to
feedstock transport direction: left to right
COIL CHAIR
max. weight of coil: 15 to
DECOILER
design: single reel
sheet width max: 1300 mm
max. diameter of coil: 2000 mm
LEVELLER UNIT
sheet width max: 1300 mm
material cross section max. (450 N/mm2): 2400 mm²
number of leveller rolls: 9
STRIP-FEEDER
feeder type: roll feeder
sheet width max: 1300 mm
sheet thickness max: 4 mm
feeding step min.: 1 mm
feeding step max.: 1500 mm
DIMENSIONS / WEIGHTS
height above floor level: 7000 mm
height under floor level: 3000 mm
total weight approx.: 105000 kg
ATTACHMENTS (PRESSES)
European CE standards: yes
- max weight of lower tool 15'000 kg
- 2 rail-mounted tool change carts in tandem design incl. adapter plates
Follow-on tool can be pre-fitted.
- crack in crown, repair offer available
Sold 
